What is AC Plus charger?

Capable of charging all battery chemistries, the X2 AC Plus has a built-in 10-amp power supply, internal balancing circuits and 10 different charge/discharge profiles, making it an essential tool for all hobbyists. You can even utilize your smartphone for remote control via an optional WiFi module.

How do you use a balance charger?

Balance Charging

1. Connect the power connectors to the balance charger’s power slots.
2. Connect the clamps of the power connectors to your battery.
3. Insert the balance connector of your battery to the designated slot in the balance charger.
4. Turn on the balance charger and go to the Balance Charge setting.

How often should rechargeable batteries be charged?

It is recommended to charge a rechargeable battery when about 70% to 75% of the capacity has been consumed. Rechargeable batteries are damaged by over-discharging them, which will have its impact on the service life of the batteries and could cause leakage.

Do you have to balance charge Lipos every time?

So when charging LiPo batteries, usually you only have to adjust to the charge current. It’s recommended to always use balance charging. Balancing chargers ensure that all the cells are charged evenly and there are no differences in voltages between them.

How do you tell if a LiPo battery is fully charged?

LiPo batteries are fully charged when they reach 4.2v/cell, and their minimum safe charge, as we will discuss in detail later, is 3.0v/cell. 3.7v is pretty much in the middle, and that is the nominal charge of the cell.

What is the Charger layout of the HITEC X1?

Charger Layout 1. Hitec X1 AC Plus Charger 4. 18AWG Wire Charging Cable 2. AC Power Cord 5. Balancing Board Cable 3. DC Power Cord 6. Universal Balancing Board Temperature Controlled Fan LCD Display Stop/Battery Type Button Start/Resume/Enter Button Decrease Value (-)/View Status Button…

What cables do I need to charge my X1 battery?

Hitec X1 AC Plus Charger 4. 18AWG Wire Charging Cable 2. AC Power Cord 5. Balancing Board Cable 3. DC Power Cord 6. Universal Balancing Board Temperature Controlled Fan LCD Display Stop/Battery Type Button Start/Resume/Enter Button Decrease Value (-)/View Status Button…

What is the liability of HITEC battery charger?

LIABILITY EXCLUSION This charger is designed and approved exclusively for use with the types of batteries stated in this Instruction Manual. Hitec RCD, USA accepts no liability of any kind if the charger is used for any purpose other than that stated.

How do I charge the X1 in lead-acid (PB) charge mode?

Pb (Lead-Acid) Charge Mode (cont.) Press and hold the ► button and charging will begin. Once charging has commenced, the charger will display Pb-6 0.4A 14.70V the following real-time information: Battery type, charg-CHG 003:10 00029 ing current, battery voltage, charging time and charged capactiy. When charging is complete the X1 will chime.

How do you fix a connection break on a Lipo battery?

If you get Connection Break the problem is possibly the cable from the battery to the charger. It could be a dirty connector either on one end of the connector or on the battery itself. Get some electronic contact cleaner and clean all the pins and sockets associated with the cable, battery and charger. I use Deoxit.

What is LieMAX?

LieMAX screens are more rectangular, like a “regular” movie screen, ditching the more square-like aspect ratio of IMAX. Any footage that was filmed in IMAX is therefore cropped, removing ~40% of the image.

How do you use a LiPo balance charger?

To balance charge your LiPo battery:

1. Connect the power connectors to the balance charger’s power slots.
2. Connect the clamps of the power connectors to your battery.
3. Insert the balance connector of your battery to the designated slot in the balance charger.
4. Turn on the balance charger and go to the Balance Charge setting.

What is the lowest safe voltage for LiPo?

The usable voltage range for a standard lipo battery cell is 3.2v to 4.2v. Any lower than 3.2v and the battery may be permanently damaged. Any higher than 4.2v and you significantly increase the risk of a battery bursting into flames.

How can you tell the difference between IMAX and LieMAX?

What is the HITEC X1 Charger?

Introduction Congratulations on your choice of the Hitec X1 charger from Hitec RCD USA. The Hitec X1 is a high-performance, microprocessor controlled charger/dis- charger with battery management capabilities that are suitable for use with most popular battery types.

What is the X1 AC plus battery charger?

Our new X1 AC Plus battery charger goes everywhere you go. Capable of charging all battery types, this charger is the affordable and portable answer to keeping your batteries charged and ready for action. The 50-watt X1 AC Plus will charge all your batteries at rates from 0.1 to 6 amps, using either 11-18V DC or 100-240V AC power sources.

How do I contact Hitec RCD customer service?

Contact Customer Service at 858.748.1767 or at [email protected]. LIABILITY EXCLUSION This charger is designed and approved exclusively for use with the types of batteries stated in this Instruction Manual. Hitec RCD, USA accepts no liability of any kind if the charger is used for any purpose other than that stated.