When was Remington Versa Max made?

2010
The Remington Versa Max, also styled as VERSA MAX, is a gas-operated semi-automatic shotgun introduced by Remington Arms in 2010.

Is the Versa Max inertia?

TESTED AND PROVEN WITH THOUSANDS OF ROUNDS. The Versaport dual piston system runs cleaner than a traditional down bore gas system, giving you both the soft recoil of a gas system and the reliability of inertia operated guns.

Do they still make Remington V3?

Currently the Remington V3 is available only in 12 gauge. Finishes include black synthetic, Mossy Oak, Shadow Grass, Blades camo and walnut. The version made available to me was black synthetic. Remington opted to chamber the V3 for only 2¾ and 3-inch shells.

Is the Remington V3 a Versa Max?

As a baseline, Remington’s V3 is comparable to its sibling Versa Max semi-auto, but the V3 is a new design that shares no internal parts with its Versa Max predecessor. Remington’s V3 semi-auto in black synthetic. It’s a no-frills semiautomatic shotgun built to handle any waterfowl or upland bird hunting duty.

What are the problems with the new Versa Max shotgun?

Problems with New Versa Max Shotgun 1 Left and right piston rattles freely when the shogun is in cocked position ( bolt pulled back ) 2 The hammer moves freely after it is released ( uncorked / bolt locked ) 3 Hand guard still cannot not be removed ( dead locked ), therefore barrel cannot be disassembled More

How do I change the power supply on my versamax plc?

Switch off the external power source to the power supply module. Turn the latch to the unlocked position. Press in the tabs on the lower edge of the power supply. Pull the power supply straight off (VersaMax® Modules, Power Supplies, and Carriers, 2003). Troubleshooting Guide for VersaMax PLC and I/O Modules.

What type of faults does the versamax® power supply module report?

The module reports a Loss of Internal Power fault for field-side circuits. The module reports an Open Wire fault for each channel, when in 4-20mA mode (VersaMax® Modules, Power Supplies, and Carriers, 2003). These are however viewed in the I/O Fault table using the programming software (Machine Edition).

What does the Green OK led mean on a versamax module?

The Green OK LED is ON when backplane power is present, internally generated field power is functioning properly, the module has been configured, and the module has been recognized on the backplane (VersaMax® Modules, Power Supplies, and Carriers, 2003). The module reports a Loss of Internal Power fault for field-side circuits.