Are Honeywell water heater gas valves interchangeable?

Natural and propane water heater gas valves are not interchangeable, so, be sure to order a valve for your type of gas. burner connection.

How do you read a Honeywell gas valve model number?

Honeywell (SV, V4, V8, VR, VS) – Honeywell valves have a part number format in the form of P(P)NNNNXnnnn. Where P or PP is the prefix denoting the type of valve: SV, V, VR or VS; NNNN is normally four numbers; X is a letter and nnnn are four more numbers.

How do you adjust the pressure on a Honeywell gas valve?

1. Remove the cap screw covering the pressure regulator screw located on the front or top of the Honeywell gas valve, depending on the model.
2. Turn the screw clockwise to raise the pressure of the water heater.
3. Turn the screw counterclockwise to lower the pressure of the water tank.

Do you have to drain water heater to change gas valve?

Removing and replacing a gas valve requires you to completely drain the water heater, turn off the gas control valve, turn off the gas and water supply.

How long does a gas valve last?

Gas Valves are routinely checked for 100,000 cycles and are used in equipment that have approximately 15 years life expectancy.

How do you troubleshoot a Honeywell Smart valve?

How to Troubleshoot a Honeywell SmartValve

1. Turn off the gas supply.
2. Makes sure the element is good.
3. Make sure the switch or knob on the SmartValve is on.
4. Make sure the call to heat function on the appliance is compatible with the SmartValve.
5. Check the line power, transformer, switches, thermostat and wiring.

What is WC in natural gas?

UNITS OF MEASURE. • Inches of water column (“wc) – inches of water column is the traditional method for measuring. natural gas or propane. There are 28 inches of water in 1 psi, so it is a fairly small amount of. pressure.