Are Simpson SDS screws galvanized?

Simpson Strong-Tie #9 x 2-1/2-in Mechanically Galvanized Strong-Drive SD Exterior Wood Screws (100-Count) item number 4. it has a rating of 4.8667 with 15 reviews.

What screws to use with Simpson ties?

The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie products.

Can you use Simpson screws for joist hangers?

Fastener Design Information In some cases, it is desirable to install Simpson Strong-Tie face-mount joist hangers, post basses and caps, and straight straps and with nails that are a different type or size than what is called out in the load table.

Can you use screws on Simpson joist hangers?

How much weight can an SDS Screw hold?

SDS — Allowable Shear Loads — Steel Side-Plate Applications and for SPF/HF withdrawal is 121 lb./in. Total withdrawal load is based on actual thread penetration into the main member.

What screws are approved for joist hangers?

Joist hangers should be installed with hot-dip galvanized structural nails whenever possible. 16d and 10d nails are usually recommended for most applications.

What screws to use for joist hangers?

Common Joist Hanger Fasteners In general, connector manufacturers recommend 16d and 10d framing nails for anchoring joist hangers to headers or walls and shorter nails, called joist hanger nails, for anchoring the joists to the joist hangers.

Can I use screws on Simpson ties?

What screws for Simpson joist hangers?

What screws to use on deck joist hangers?

In general, connector manufacturers recommend 16d and 10d framing nails for anchoring joist hangers to headers or walls and shorter nails, called joist hanger nails, for anchoring the joists to the joist hangers.

What does SDS mean in screws?

SDS stands for Self Drilling Screw.