What does gearbox fault mean on a Jaguar?

What does gearbox fault mean on a Jaguar?

When a gearbox fault is present this means that an issue has occurred in the transmission. There are multiple shift solenoids in the transmission. If any one of these malfunction in anyway the light could be set. Mechanical issues can also set this light, such as broken syncros or possibly chewed up gears.

How do you check the transmission fluid on a 2003 Jaguar S Type?

How to Check Your Transmission Fluid

  1. In order to properly check the fluid level, be sure to warm up the engine.
  2. Locate the transmission fluid dipstick.
  3. Remove the dipstick and touch the fluid, moving it around between your thumb and forefinger.
  4. Wipe off the dipstick with a rag and insert it back into the vehicle.

How do I reset my Jaguar gearbox?

Registered

  1. go in to the car.
  2. WITHOUT foot on the BRAKE press the start button: so the (ignitio is on) but (engine is off)
  3. press and hold gas pedal down for 30 + second.
  4. take your foot off from gas pedal.
  5. press the start button to turn off ignition (let the car turn off completly before you start it again)

How do I reset my Jaguar XF transmission?

How do I reset my discovery sport gearbox?

Registered

  1. Press Start button but don’t turn on the engine.
  2. Press the Accelerator down to the floor for about 15 seconds.
  3. Hit the start button again to turn off the power.
  4. Remove foot from Accelerator.
  5. Waity for 2 Mins.
  6. Start the engine and Drive.

Are there any problems with the automatic transmission in a Jaguar?

Jaguar S-type owners have reported 33 problems related to automatic transmission (under the power train category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jaguar S-type based on all problems reported for the S-type. After engaging reverse, the transmission froze.

Does the 2005 Jaguar S-type have automatic transmission problems?

Automatic Transmission problem of the 2005 Jaguar S-type 1. Failure Date: 03/13/2010. After engaging reverse, the transmission froze. The transmission would not shift from reverse and into drive or any other gear. The vehicle had to be towed to the shop.

What causes a jaguar not to shift in gear?

CAN Network / Wire harness – Damaged wire harnesses from ECU / PCM to the transmission housing can cause shifting problems. For example, your Jaguar may not shift at all or go in gear due to a CAN network problem. Typically when a CAN network issue is present, you may notice a number of other issues as well.

Why does my Jaguar S-type have a reverse gear?

When the forward drive gear was selected and the vehicle was in drive or stationary, the gear box could potentially select the reverse gear without notice. I leased a new 2000 Jaguar S-type in April of 2000. Since that time , the tranmission was faulty. Jaguar found the problem to be a faulty transmission and replaced it.

Related Posts