What is multi-information display?
The multi-information display in the instrument panel displays various information and messages when the ignition switch is in the ON (II) position. Some of the messages help you operate your vehicle more comfortably.
How do I turn on my Toyota screen?
Customize touch screen display: Select Display. Press Off to turn touch screen display Off. Touch screen display can be turned on by pressing any button on the commander.
How do I make my Toyota screen brighter?
Customize touch screen display:
- Select SETTINGS from the Home screen.
- Select DISPLAY tab.
- Select Display.
- Select System to adjust touch screen display according to time of day.
- Select Brightness, use slider to adjust touch screen display brightness as desired.
Can I change my speedometer?
Confirm that the speed changes as the vehicle drives slower and faster. Replacing the speedometer can seem like a large job, but when broken down into steps, many are able to complete it themselves. If you have any questions along the way, you can always Ask a Mechanic.
How do I reset my Toyota Sienna navigation system?
How to Reset Toyota Navigation
- Turn the Navigation system “On” and press the “Setup” button located on the right side of the unit.
- Select “General” from the top right side on the touchscreen menu.
- Press the “Down” button to select “Delete Personal Data.”
How do you reprogram a speedometer?
Press and hold the calibration button located on the speedometer, start the vehicle, and then release the button. Press that button again and then take the test drive. Once you have driven the distance needed, press the button once more and the speedometer will calibrate itself to accommodate the new tire size.
How do I change my digital odometer reading?
Digital odometers can be rolled back by removing the vehicle’s circuit board to change the odometer reading, or using rollback equipment that hooks right into the vehicle’s electronic circuit.
How do I reset my Toyota instrument cluster?
Push and release the Sel/reset button button 3 times repeatedly. The instrument cluster begins its self-test. Each successive press of the Sel/reset button initiates a new cycling of all the gauges.
Do you have to reprogram a instrument cluster?
The short answer is no. Replacing the instrument or gauge cluster won’t reset the mileage.
How do you calibrate a Toyota speedometer?
