What year did the PSE Stinger come out?
The PSE Stinger Max has been around since 2008, and is one of the venerable company’s best compound bow models because it delivers exactly what it promises: solid shooting and hunting performance at an affordable price.
Table of Contents
What do the numbers on PSE limbs mean?
The two digit number that you can see on the limbs indicates the poundage of the limbs. 26 -50#, 30 – 60#, and 34 – 70#. They should all be the same. At the top left to right #131 / 130 bottom #133 / 138 don’t if that’s the same as some other pse bows.
How long should my arrows be for a 30 inch draw?
That could become especially critical when shooting fixed-blade broadheads, which tend to magnify tuning issues. The Easton spine chart recommends a spine of 250 for a 30-inch arrow shot from a bow set at 70 pounds. Cut that arrow length down to 28 inches, and the spine chart recommends a 340 spine.
What are limb pockets?
The limb pocket is what attaches the bow’s limbs to the riser. They may be constructed from aluminum or molded from high strength plastic or other materials. The primary job of the limb pocket is to hold the bow limb securely in place.
What kind of Cam set up does the PSE Stinger™X include?
USERS GUIDE PSE STINGER™X INCLUDES STINGER ™X STILETTO SX™ CAM DRAW SETTING CHARTS PSE STINGER X- 70# PERFORMANCE CABLE SETTINGS Inner Cam Stop Setting Draw Length Setting Draw Weight at Bottom Draw Weight 13 Turns Off
How do you adjust the string post on a PSE Cam?
STRING POST ADJUSTMENTS PSE Vision cams have a string post adjustment for draw length as well as inner cam adjustments and “Flexible Cam” adjustments. To make a string post adjustment, compress the bow in a suitable bow press and relieve tension from the string and cables. See the draw length adjustment chart for your bow for details.
Can you use a Bow Press to service a PSE X Bow?
USING A BOW PRESS WITH X TECHNOLOGY BOWS ALL PSE X Technology bows MUSTbe serviced in an approved bow press and require special consideration. Do not attempt to service these bows in any bow press without reviewing the procedures described herein.
How do I install the PSE Sting stop™ backstop?
Note: Several PSE bow models come from the factory with the PSE Sting Stop™ Backstop installed. These instructions refer to reinstallation or adjustment if needed after making adjustments to your PSE bow. STING STOP™INSTRUCTIONS 1. Thread the Sting Stop™nut all the way up toward the bumper of the Sting Stop™ rod. 2.