Why does my Bose bass module keep popping?

Check for sources of wireless interference. To determine if a device might be interfering, try unplugging its power cord or disabling Wi-Fi on the device. If the issue is resolved when a particular device is removed, try placing that device farther away from your product, if possible.

How do I connect my Bose bass module to my sound bar?

To wirelessly connect the bass module or optional wireless surround speakers:

1. Connect either the bass module or surround speakers to power.
2. On the remote control, press the SoundTouch button.
3. Press and hold 7 on the remote until the connectivity indicator on the soundbar blinks white.

How do I reset my Bose subwoofer?

Try resetting the bass module by disconnecting power for 30 seconds. Disconnect the power cord from the back of the bass module or from the power outlet. Wait 30 seconds, then reconnect power and try again.

How do you clean a Bose subwoofer?

How to Clean Bose Speakers

1. Unplug the speakers from the power source. Never use a wet cloth around electronics that are plugged into an outlet.
2. Wet a soft cloth so it is lightly damp. Do not use too much water.
3. Vacuum the grille panels if dust collects. Be careful when doing this.

How do I pair my Bose Acoustimass module?

To connect the components of your system:

1. Connect the Acoustimass module cable from the Acoustimass module jack on the system console to the Input jack on the bass module.
2. Connect the end of the speaker cable with one plug to the Speakers jack on the bass module.
3. Connect the other end of the speaker cable to the speakers:

Why is my subwoofer making a popping noise?

So when you change inputs or change listening modes and you hear the subwoofer(or any speaker) “pop” this indicates that particular pre-out jack is not being muted….or not being muted for a long enough period of time. This can indicate there is a failed diode / circuit in the receiver.

How do I increase the bass on my Bose subwoofer?

On the remote control, press the Bass button: The light on the speaker blinks white three times. Press the + or – button to increase or decrease the amount of bass.

How do you know if your subwoofer is blown?

Test the sound at a low volume to listen for whether your sub has been blown. If it is distorted, you have a partially blown subwoofer, and if there is no sound at all, it is completely blown. If the subwoofer is receiving its signal via a cable, then check the cable before rushing to conclusions.

Can you fix a blown subwoofer?

Can you fix a blown subwoofer? Yes, you can fix a blown subwoofer especially when it is partially blown sub damaged cone. However, a damaged voice coil will be difficult to replace. Depending on the extent of the problem, the best solution is to purchase a new subwoofer.

How do you increase bass on Bose Acoustimass?

On the remote control: • Press to increase the bass. Press to decrease the bass.