How do I update my HP VC firmware?

We need to download and install the HP utility-Tool called HP BladeSystem c-Class Virtual Connect Support Utility ( VCSU ) to upgrade the HP Virual Connect Flex Module . By using the below link , download the tool and install it in your local machine. Depends on the model download the latest firmware .

How to downgrade virtual connect firmware?

To downgrade from Virtual Connect Firmware Version 1.20a or 1.21 to version 1.1x:

1. Remove any HP 1/10Gb-F VC-Enet Modules in the enclosure (these modules are not supported with Virtual Connect Firmware Version 1.1x).
2. If the Active Virtual Connect module is in Bay 2, force a failover to Bay 1.

What is Virtual Connect Manager?

Virtual Connect Manager is a web console built into the firmware of Virtual Connect Ethernet modules, and is designed to configure and manage a single Virtual Connect domain, up to 64 servers.

What is VC in HPE?

Virtual Connect Enterprise Manager (VCEM) or Virtual Connect Manager (VCM) is used. The Virtual Connect Firmware Version is earlier than Firmware Version 4.50. A profile edit is attempted to modify the Primary and Secondary SAN boot order.

What is HP Virtual Connect FlexFabric?

Virtual Connect FlexFabric provides up to four physical functions for each blade server adapter network port, with the unique ability to fine-tune bandwidth to adapt to virtual server workload demands on the fly.

How do I add VLAN to HP Virtual Connect Manager?

To access the option for configuring VLAN mapping, you can use the menu bar across the top of the right side of the HP Virtual Connect Manager. Simply click Configure > Ethernet Settings, then click on the Advanced Settings tab. There you will see the option to either tunnel VLAN tags or map VLAN tags.

How do you access administrator on HP board?

Remote access to the Onboard Administrator

1. Open a command-line window from a network-connected client.
2. At the prompt, telnet to the IP address of the Onboard Administrator and press Enter.
3. Enter a valid user name and press Enter.
4. Enter a valid password and press Enter.
5. Enter commands for the Onboard Administrator.

How do you reset Onboard Administrator?

The Onboard Administrator (OA) has a reset button on the rear of the enclosure. It can also be reset through the OA Insight Display’s Enclosure Information screen. The servers can be reset through the OA or through the Integrated Lights-Out 2 (iLO 2).