How do you use the VTM-4 lock on a Honda Pilot?

How do you use the VTM-4 lock on a Honda Pilot?

Press the “VTM-4 Lock” button between the driver’s instrument panel and the radio. Once the “VMT-4 Lock” button’s indicator light is on, your Pilot will be using all four wheels more aggressively to tackle the terrain.

What does VTM-4 mean on Honda Pilot?

Variable Torque Management 4WD System
The Variable Torque Management 4WD System (VTM-4) automatically transfers varying amounts of engine torque to the rear wheels under lower traction conditions.

Is Honda Pilot AWD all the time?

But if you’re like most Culver City-area SUV enthusiasts you may be wondering, “Does the Honda Pilot have AWD?” The Honda Pilot comes standard with two-wheel drive, but you have the option to upgrade to the Intelligent Variable Torque Management™ All-Wheel Drive (AWD) System, which provides enhanced traction and …

When should I use VTM-4 on a Honda Pilot?

That is no problem for the Honda Pilot either. The VTM-4 Lock® feature allows you to manually lock the rear differential in place to get you moving when faced with extreme conditions. By simply pushing the Lock button, you can fully engage four-wheel drive to gain momentum, putting all of your power to the rear axle.

Does Honda Pilot have locking differential?

The system also features a VTM-4 lock button on the dashboard which locks the rear differential and sends 25% of the power to each rear wheel.

How do you turn off the AWD on a Honda Pilot?

To turn off the VTM-4 on your Honda Pilot, you can use any of the following methods:

  1. While the car is running, press and hold the VTM-4 button, typically located on the dashboard next to the radio.
  2. Shift the drive selector lever to P and then back to D while stopped.

Is the Honda Pilot always in 4WD?

Honda Pilot isn’t always in AWD as it’s automatic and can detect when to engage the rear wheels. Honda’s Real-Time AWD with Intelligent Control System constantly monitors the road conditions to provide torque to different wheels.

Is Honda Pilot always in AWD?

How does Honda Pilot drive in snow?

Press the “snow” button on your gear selector on a two-wheel drive vehicle, or the vehicle icon button if you have all-wheel drive. The drive modes will pop up in your driver information center. Press the button again to cycle through the modes. Wait a few seconds when the mode you want is highlighted so it can engage.

How do you turn on the AWD on a 2021 Honda Pilot?

Step-By-Step Instructions for Honda Intelligent Traction Management

  1. Put Your Honda Vehicle in Park.
  2. Press the Snow Button on the Center Console (2WD Models)
  3. Press the Honda Vehicle Icon Button on the Center Console (AWD Models)
  4. Press the Button on the Center Console to Cycle Modes.

How does Honda Pilot AWD system work?

It distributes engine torque from front to back, instinctively directing power to the wheels with traction. The i-VTM4 AWD system has a pair of electro-hydraulically actuated clutch packs—one to drive each rear wheel—allowing for varying amounts of torque to be directed to each rear wheel independently.

What causes a VTM 4 light to come on?

The system turns on and off automatically. If it comes on, it means that your car has lower traction at that particular moment. Normally, the VTM-4 light is nothing to worry about. It just means that your torque management system is working to compensate for adverse road conditions.

What is a PCM on a Honda Pilot?

The powertrain control module (PCM) is a small computer that monitors all engine control operations in real time. It uses a large network of sensors, solenoids, sending units, and other electronic components to both receive and send information which enables the vehicle to run at peak performance.

What does VTM 4 mean on a Honda Pilot?

Your Honda Pilot is equipped with a Variable Torque Management 4-Wheel-Drive System (VTM-4). The system turns on and off automatically. If it comes on, it means that your car has lower traction at that particular moment.

How does the Honda VTM-4 work in snow?

If your vehicle gets stuck in extreme mud or snow, you can manually activate the VTM-4 by pressing the lock button in front. It provides maximum torque to the rear wheels. However, before pressing the lock button, the Honda pilot should be in the first, second, or reverse gear, and the speed should be below 17-19 miles per hour.

What happens if you press the lock button on a Honda?

However, before pressing the lock button, the Honda pilot should be in the first, second, or reverse gear, and the speed should be below 17-19 miles per hour. Engaging the VTM-4 lock on highways or smooth surfaces can damage the rear differential at turns. You can also observe strong vibration and noise due to the locked axle.

What does lock mode do on a Honda Accord?

When lock mode is selected at vehicle speeds below 18-mph, the system ECU commands a preset maximum amount of rear-drive torque to be delivered to the rear wheels for improved traction in very low-speed, low-traction, conditions.

Related Posts