How much does a Saarinen table weigh?
Dimensions
Table of Contents
| w | weight | |
|---|---|---|
| Laminate | 78″ | 131 lbs |
| Stone | 78″ | 259 lbs |
| Veneer | 78″ | 131 lbs |
Can a Saarinen table go outside?
The collection is a defining accomplishment of modern design. All-weather hardware and materials ready the classic Saarinen table for a life outside—a modern focal point for any outdoor setting.
How many people can fit around a 96 oval table?
8 adults
A 84” to 96” long oval table can seat up to 8 adults.
Can a tulip table go outside?
STRAIGHT FROM THE ’50s Inspired by the legendary design by Eero Saarinen, the Tulip table has been adapted for outdoors and features a refreshed look.
What size is a dining table that seats 8?
Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches….Standard Dining Table Sizes.
| Seats | Length |
|---|---|
| 6-8 | 72-80″ |
| 8-10 | 80-92″ |
| 10-12 | 92-110″ |
How do you authenticate Knoll furniture?
Many times a Knoll identifier, whether a sticker or label sewn in place, can be found on the bottom cushion of a vintage chair (the Knoll International name was used after 1969). A “Knoll Studios” mark stamped in the frame with Mies’ signature is found on chairs made since 1996.
How do you authenticate a Knoll tulip chair?
How to spot a fake. Authentic Tulip Chairs are manufactured by Knoll International and handmade in Italy. They are stamped with the Knoll logo and have Eero Saarinen’s signature engraved on their underside, as seen below. Knock-off designs will not have any of these original markings and will be plain underneath.
How long does a dining room table need to be to seat 8?
78″ long
For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.
How big of a table do I need to seat 10?
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
What did Saarinen do for Knoll?
Saarinen went on to design many of Knoll’s most recognizable pieces, including the Tulip chairs and tables, the Womb chair, and the 70 Series of seating. In addition to these achievements, Saarinen became a leader of the second-generation modernists.
Who is the designer of Knoll furniture?
When Florence joined Knoll in the 1940s, she invited Eero to design for the company. Saarinen went on to design many of Knoll’s most recognizable pieces, including the Tulip chairs and tables, the Womb chair, and the 70 Series of seating.
What kind of furniture does Eero Saarinen make?
From the late 1940s through the 1950s, Eero Saarinen designed many of the most recognizable Knoll pieces, including the Tulip Chairs and Pedestal Tables, the Womb Chair, and the 70 Series Executive Seating Collection. His designs used modern materials in graceful ways, helping establish the identity of Knoll during our formative years.
How did Eero Saarinen meet Florence Knoll?
At Cranbrook, Saarinen also met Florence Knoll, who at that time was a promising young protégé of Eliel Saarinen. When Florence joined Knoll in the 1940s, she invited Eero to design for the company.
