What is the default Linksys IP address?

What is the default Linksys IP address?
The web interface is a page where you can configure your Linksys router’s settings. The fist step to accessing this page is to check your router’s local IP address. Unless it is changed, your Linksys router’s default local IP address (also known as the Default Gateway) is 192.168. 1.1.

What is the default IP address for a Linksys router and password?

Most Linksys brand routers have a default password of admin and a default IP address of 192.168. 1.1, but some differ, as you can see in the table below. Once in, change the default router password from admin to something more secure.

How do I reset my Linksys EA4500?

Hardware Reset – Press and hold the Reset button at the back panel of the Linksys EA4500 for about 10 seconds then release. Software Reset – Reset the router through the web-based setup page. Open an internet browser then enter the default IP Address of your router which is 192.168. 1.1.

What is default login for Linksys router?

The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password. QUICK TIP: Changing the router’s password through the web-based setup page may prevent you from using the Linksys Connect software.

How do I reset my Linksys router to factory defaults?

  1. Access the router’s web-based setup page.
  2. Click the Administration tab then click on the Factory Defaults sub-tab.
  3. Under the Factory Defaults section, click on the Restore Factory Defaults button.
  4. Access the router’s web-based setup page.
  5. Click the Administration tab.

How do I set a default Linksys router?

Locate the Reset button and, using a pen or a paper clip, press and hold the Reset button for 10 seconds. QUICK TIP: For router models such as the Linksys Wireless-B and Wireless-G routers, press and hold the Reset button for 30 seconds. QUICK TIP: Observe the Power light of the router while pressing the button.

How do I setup my Linksys Smart WiFi router?

Connect two (2) routers with the capability of sharing the network resources

  • Use the router as an additional access point on an existing network
  • Connect the router to a modem/router from your Internet Service Provider (ISP)
  • Disable the router functionalities to work with third party devices
  • What are the steps to configure the Linksys router settings?

    Connect to the router. Use an ethernet cable,and plug your computer into the router.

  • Enter your information. If this is your first time setting it up,you will be asked for your credentials.
  • Basic setup.
  • Continue to the Wireless tab.
  • Click the Wireless Security link.
  • Select “Access Restrictions.
  • Use the Applications and Gaming tab.
  • How to setup a Linksys router after reset?

    – Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router. – Connect one or more computers to the Ethernet ports on the router, labeled 1 through 4. – Plugin the router’s power adapter and wait a few minutes while the system starts. – Visit the Web address in any Web browser on a computer connected to the router.

    How to set up VPN on Linksys routers?

    Choose a PPTP Server. Before you start,decide which IPVanish server you want the VPN to connect to.

  • Configure PPTP Settings. Use your browser to access the router’s DD-WRT administration system.
  • Confirm the Changes. Give the router a few minutes to finish rebooting and then five minutes more for the changes to propagate through IPVanish’s system.
  • Related Posts