Does Garmin echoMAP have a flasher?

The flasher shows sonar information on a circular depth scale, indicating what is beneath your boat. It is organized as a ring that starts at the top and progresses clockwise.

Is Clear Vu the same as Down Imaging?

While these products are similar, there is one key difference that makes them quite different. Both are marketed as down-scanning products, but only one of them has an actual down-facing element in its transducer. That makes a big difference where it matters most – on the water.

What does bottom lock do on fish finder?

​The Bottom Lock mode displays the bottom as a straight line, no matter how the bottom contour may change. It displays targets such as vegetation and fish above the bottom in a predetermined zone in relation to the bottom.

What is a flasher on a fish finder?

If you have ever been interested in ice fishing, you have probably heard about ice fishing with a flasher. By using sonar, a flasher displays objects detected in the water column on a circular screen. The display allows the angler monitor depth and view fish activity in relation to their lure.

Is Garmin ClearVu worth?

Is Garmin ClearVu worth it? Yes, Garmin ClearVu is worth it when fishing over dense cover (such as brush piles or sunken trees), since ClearVu can detect individual fish that are right next to, or even inside thick cover.

What is bottom lock on Garmin?

Reversed Depth numbers Display The bottom lock is a feature that zooms into the bottom of the sonar image. Depth numbers reverse when the bottom lock function is enabled. The depth range will start at 0 feet at the bottom of the screen and increase going up the side of the screen.

What is gain sounder?

SENSITIVITY/GAIN For the average user, sensitivity or ‘gain’ is the most under-utilised of functions on a fish-finder menu, the which means that many anglers fail to get optimum performance from their sounder.

What does sensitivity do on a fish finder?

As you turn the sensitivity down, it filters more of the returns, and when set very low, the fish finder may show nothing because all returns get filtered out.

What is the difference between a flasher and fish finder?

In general, fish finders work while moving and flashers are specific to vertical and stationary fishing.