How do I troubleshoot my Whirlpool dishwasher?

How can I fix my Whirlpool dishwasher when it’s not draining?

1. Check whether the wash cycle is complete.
2. Check the drain for clogs.
3. Assess the drain hose.
4. Examine the dishwasher and garbage disposal connection.
5. Review the dishwasher check valve.
6. Look into issues with the drain pump.

How do you calibrate a Whirlpool dishwasher?

There’s a simple way to reset the blinking light of your dishwasher:

1. Press the “Heated Dry” button. Then instantly press the “Normal” button.
2. Press the “Heated Dry” button again. Then quickly followed by the “Normal” button. This will take the dishwasher into diagnostic mode/ and it will eventually reset.

Why is the start button on my Whirlpool dishwasher flashing?

The Start/Resume light flashing, (Select models), indicates the cycle or start-up was interrupted. This can happen if the door is opened during the cycle or power has been interrupted. Push the door firmly closed within 3 seconds of pressing Start/Resume.

Why is my Whirlpool dishwasher blinking and not starting?

The blinking light typically indicates water heat was not detected during the cycle. You can stop the blinking and attempt to fix the problem by running a diagnostic cycle using the control panel on your dishwasher.

How do I reset my Whirlpool dishwasher control board?

To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in.

What are the error codes for a Whirlpool dishwasher?

What do your dishwasher error codes mean?

• F01 — Anti-flooding overflow.
• F02 — Water fill solenoid valve failure.
• F03 — Water drain failure/ timeout.
• F04 — Thermostat fault.
• F06 — Water fill timeout.
• F07 — Water turbine damaged.
• F08 — Temperature timeout fault.
• F09 — Software error.