What is AquaMatic valve?
962 AquaMatic Stager Control Provides an easily adaptable control of stagers for diaphragm valve nests. This fully programmable series of controls provide the ability to fine tune the operation to meet application requirements. View Products.
How does a diaphragm valve work?
Diaphragm valves use a flexible diaphragm connected to a compressor by a stud which is molded into the diaphragm. Instead of pinching the liner closed to provide shut-off, the diaphragm is pushed into contact with the bottom of the valve body to provide shut-off.
What does AquaMatic mean?
n a yellow fuming corrosive mixture of one part nitric acid and three to four parts hydrochloric acid, used in metallurgy for dissolving metals, including gold, (Also called) nitrohydrochloric acid.
Who owns AquaMatic?
We are pleased to announce that the AquaMatic product line, formerly manufactured by Pentair, will now be produced and serviced by the newly created, AQ Matic Valve and Controls Company. The company was created by Walter Senney, president and owner of Met-Chem Group, headquartered in Cleveland, OH.
What are the 2 types of diaphragm valves?
There are two main categories of diaphragm valves: one type seals over a “weir” (saddle) and the other (sometimes called a “full bore or straight-through” valve) seals over a seat.
What is purpose of 3 way valve?
A 3-way control valve shuts off water flow in one pipe while opening water flow in another pipe. In a modulating or 3-point floating application the valve can also mix water from two different pipes into one pipe or divert water from one pipe into two different pipes.
Where are 3 way valves used?
The ability to mix fluids from more than one inlet makes 3 way valves ideal for heating and cooling various media such as water, oils, and chemicals. These valves are also commonly used as bypass valves in primary and secondary loop applications.
What’s a 3 way valve?
A three-way ball valve has three ports or openings that are connected to piping or tubing for gas or fluid flow (media) to pass through. These ports are usually described as one inlet and two outlet ports or one outlet and two inlet ports depending upon the flow direction through the valve.
