How do you use a Wanner grease gun?

Wanner High-Pressure Grease Gun

1. Open the Air Relief Screw (35591.00).
2. Turn the Handle with the Piston Rod; pull back firmly and lock it on to the end cover (38013.00).
3. Turn the Cylinder (38195.00) to the left to unscrew it from the Gun Head (33731.00).
4. Remove the empty grease cartridge.
5. Insert New Cartridge as follows:

How do you load and prime a mini grease gun?

How to load a mini grease gun with a cartridge

1. Step 1: Separate the head and the barrel.
2. Step 2: Prepare to load the grease.
3. Step 3: Inserting the grease cartridge.
4. Step 4: Return the head.
5. Step 5: Unlocking the rod handle.
6. Step 6: Priming the gun.
7. Step 7: Wait for bubbles to clear (if any)

Why does my grease gun get stuck on the fitting?

Grease guns get stuck on fittings due to clogged zerk fittings which don’t let the grease pass through and cause a pressure build up that prevents them from releasing. So to get it unstuck unscrews the hose or hardline from the gun which will release the pressure and allow it to come off.

What is needle adapter?

These needle adapters allow for economical extension of an ordinary hypodermic syringe. The now “extended” needle easily reaches the paracervical and uterosacral areas to provide improved control for local infiltration of anesthetic agents. Slightly malleable for additional convenience.

How do you put a grease cartridge in a grease gun?

Insert the open end of the grease cartridge into to the Cylinder (38195.00). Remove the second cap of the grease cartridge with a screw driver or knife. Screw together the Cylinder (38195.00) and the Grease Gun Head (33731.00).

Where do you put the delivery hose on a Wanner grease gun?

The tapping for the “valve” at the top of the Wanner grease gun can also be used as an alternative location for the metal delivery hose. The valve is then fitted into the tapping where the delivery tube was removed from. Cars Owned::Wade-blown TR6 Supercharging.

How do you replace a grease cartridge on a Kenmore washer?

Remove the loose rear cap of the grease cartridge. Insert the open end of the grease cartridge into to the Cylinder (38195.00). Remove the second cap of the grease cartridge with a screw driver or knife. Screw together the Cylinder (38195.00) and the Grease Gun Head (33731.00).

How do you fill up a grease can?

Take the pressure off the grease in storage by pulling & locking the black handle. Actually you know how the grease cans have a plate in the top with a hole in? You push the empty cylinder, with the chain pulled right out and locked, down onto the plate and the grease will fill the cylinder.