How much does a 20 ft deck cost?
The cost to build a deck that is 10×10 in size is approx $2,000, $6,500 to build a 14×20 foot deck, and $8,800 to build a 20×20 foot deck. A deck made of pressure-treated wood, hardwood, or composite costs about $25 per square foot for both materials and installation.
How much does a treated deck cost?
The average cost of basic pressure treated pine runs about $15-$25 per square foot. Fancier woods will cost a bit more, usually between $25-$30 per square foot. This is the cost for a basic deck.
How long should pressure-treated deck last?
Wooden Decks Made from Pressure-Treated Lumber So while it will resist a lot of the environmental changes that the weather brings, it might not be the ideal material for everyone. If you maintain and seal your pressure-treated deck, it can last you around 50 years.
What size backyard deck should I get?
Most builders suggest that your deck should be no larger than 20 percent of the house’s* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!
Is cedar or pressure treated wood better for decks?
When it comes to comparing treated wood vs. cedar, pressure-treated wood is the sturdier and more weather-proof of the two. It’s highly resistant to insect attack and rot, and special versions rated for “ground contact” can be buried in soil and will continue to shrug off decay for decades.
How long should pressure treated deck last?
What is a good depth for a deck?
Add another foot for your feet, and you need a deck at least 4′ (1.2m) deep. If you want to share this moment with some special, your deck needs to be a minimum of 9′ (2.7m) wide and 4′ (1.2m) deep. Ideally, with the door from the house in the middle of the deck.
How long does pressure treated wood deck last?
What is PT lumber used for decking?
Often referred to as PT lumber by deck builder professionals, it is used in more than 70% of the decks built in the United States. That’s a hefty piece of the deck material pie.
How much does it cost to build a 20’X18’ deck?
If you were to go a bit bigger and build a 20’ x 18’ deck: If that deck had a height of 8’2” and ran a total of 339 square feet, pressure-treated pine would be your least-expensive option for materials at $3,062. If you used exotic hardwood, materials would cost nearly $8,000.
Where can I get the best price on pressure treated decking?
Visit every supply house that sell your particular brand of Pressure Treated Deck and try to negotiate a better price with each supplier – I save on average 20%. Remember, there are multiple styled homes in the U.S – from: Contemporary, colonial, cape-cod style, ranch, bungalow, victorian, etc.
What is the cheapest wood to build a deck?
Cedar – At $4 to $8 per square foot, cedar is naturally resistant to weathering, insects, and rot. It requires yearly maintenance of sanding, sealing, and staining. Bamboo – Bamboo is the cheapest material used in decking at an average cost of $3 per square foot.
