Is ardex a Dunlop?
Dunlop Distribution Building Adhesives Ltd was founded in 1962 as a development centre for the British ceramic tile industry, the Company is a wholly owned subsidiary of Ardex GmbH, Germany.
Is Ardex grout waterproof?
ARDEX WATM 100% Solids Epoxy Grout and Adhesive – A very easy to apply and clean epoxy grout that provides a highly durable waterproof finish with chemical resistance ideal for pools and showers where high levels of hygiene are required.
Is ardex epoxy grout?
ARDEX EG 15 is a high performance epoxy grout designed for situations that require strict standards of hygiene, high chemical and physical resistance. ARDEX EG 15 is exceptionally easy to clean up during application. It can be used in joints up to 15mm wide on walls and floors.
What is Ardex grout?
A smooth, flexible cement-based grout with improved colour integrity, ARDEX FG 8 can be used for tile joints 1mm to 8mm wide on walls and floors.
How much ardex do I need?
Technical Data ARDEX FL™ Mixing Ratio: 2 1/4 – 2 1/2 quarts (2.1 – 2.3 L) of water to one 25 lb. (11.3 kg) bag. 28 – 32 oz.
Who makes Dunlop adhesive?
Dunlop Adhesives in the UK and continental Europe is a pioneering brand of tile adhesive and grout products. Dunlop and the flying D device are trademarks of Sumitomo Rubber Group….Languages.
Accept | |
---|---|
Host(s) | player.vimeo.com |
Cookie Name | vuid |
Cookie Expiry | 2 Years |
Does Ardex grout need to be sealed?
While not required, a penetrating grout sealer can be applied. Follow sealer manufacturer’s recommendations for substrate preparation, application and cure. Please note that ARDEX FL must set a minimum of 72 hours (70°F / 21°C) prior to being submerged in water.
Is epoxy grout the best?
It is highly resistant to stains, cracks, chemicals, harsh weather conditions, and climate changes. These characteristics make epoxy grout the only way to go if you’re looking for the most durable, efficient way to do tile work. The strength of epoxy grout makes it perfect for any tile job, indoors or outdoors.
How long does Ardex grout take to dry?
DRYING TIME Initial set after 24 hours, full cure after approximately 14 days at 23°C and 50% relative humidity. Grout joints can be sealed after 24 hours. Allow longer for dense tiles, lower temperatures or high relative humidity.
How much does a bag of ardex cover?
Covers up to 300 sq ft per bag Install floor coverings in as little as 15 minutes. Mixes with water only.
How thick can you pour ardex?
ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm).
Is Dunlop Japanese?
Dunlop Tires are well known throughout the world. The company is a partnership between two different companies, the Japanese company Sumitomo Rubber Industry owning twenty five percent, and the British company, Goodyear Tire and Rubber Company owning seventy five percent.
Who owns Dunlop brand in India?
On October 1, 2015, Sumitomo Rubber Industries acquired the Dunlop Motorcycle tire brand in North America from the Goodyear Tire and Rubber Company after dissolving its 16-year global joint venture. In India, the brand is operated by Dunlop India Ltd….Dunlop Tyres.
Product type | Tires |
---|---|
Markets | Worldwide |
Website | dunloptires.com |
What is the cost of epoxy grout?
Epoxy grout is favored because it’s durable, waterproof, and doesn’t stain easily. Unfortunately, it also costs more than cement grout. The cost of epoxy grout is approximately $2.63 – $6.50 for each square foot (0.10 sq m).
Should I seal Ardex grout?
ARDEX GCS deeply penetrates the grout to provide lasting color and protection. When dry, the sealing properties provide stain resistance and help to protect against mold and mildew.
How many square feet does a bag of ardex cover?
Covers up to 300 sq ft per bag Install floor coverings in as little as 15 minutes. Mixes with water only. Exceptional bond strength. Easy to mix and apply.
Does ardex need a primer?
NON-POROUS SUBSTRATES: ARDEX FEATHER FINISH will bond to some non-porous substrates, such as burnished concrete, terrazzo, and ceramic and quarry tile, without the use of a primer.