What are the different standards of pipe markings?

What are the different standards of pipe markings?

The sizing requirements are as follows: 0.7” to 1.3” Pipe Width x 8” Label Length = 0.5” Text Height. 1.4” to 2.4” Pipe Width x 8” Label Length = 0.7” Text Height. 2.5” to 6.7” Pipe Width x 12” Label Length = 1.3” Text Height.

What is the standard color of pipe used for water?

Olive Green

Water Lines: Raw water Olive Green
Waste Lines: Sewer (sanitary or other) Dark Gray
Other Lines: Compressed Air Dark Green
Gas Red
Other Pipes Light Gray

What is about ANSI ASME A13 1 pipe color code standard?

ANSI/ASME A13. 1 recommends a color code designed to quickly alert workers to potential hazards. The color code consists of six predefined colors to identify broad types of pipe contents. There are also four user-defined combinations that can be defined separately by each facility using the standard.

Is standard for pipeline Colour coding?

Commonly used Pipe Color Code As per Is 2379

Pipe Colour Code Use in Refinery As per IS 2379
Nitrogen Canary yellow
Oxygen Canary yellow
Hydrogen Canary yellow French blue
Naptha Dark Admirality grey Black

What are blue pipes used for?

Blue pipes are used for potable or drinking water. Green pipes are sewer and drain lines.

Is standard for pipeline colour coding?

Is standard for pipe line color coding?

What does blue pipe mean?

drinking water
Blue pipes are used for potable or drinking water. Green pipes are sewer and drain lines. Lavender or purple pipes carry reclaimed wastewater that undergoes filtration and disinfection treatment before being reused for irrigation.

What is yellow pipe for?

Color Codes for Pipes The color yellow specifically is used with black lettering to denote the presence of flammable and oxidizing liquids and gases. Some examples of those could be anything from gasoline, oil, natural gas, propane, and even chlorine.

What is purple pipe used for?

Purple pipe carries recycled water that can be used for irrigation and industrial use, while potable reuse “employs reverse osmosis filters to purify sources to a level that exceeds drinking water standards, and can be blended with potable supplies.” Purple pipes are already in use.

Is standard for pipe line color code?

Why are pipe lines color coded?

Color coding provides important information about the hazard presented by the pipe’s contents. Text identifies the pipe’s contents by name and may also indicate temperature or pressure (if either presents a hazard).

What does Blue pipe mean?

What are the standards for pipe color coding?

There are national and international standards that provide the guidelines for uniform color coding in industries that are used to color code of pipe to identify. ASME A13.1 – Scheme for the Identification of Piping Systems. BS 1710 – Specification for Identification of Pipelines and Services. IS 2379 – Pipelines Identification Colour Code.

What do the colors of the pipe labels mean?

This standard identifies the color of the labels and what those colors mean. The following are the main options for this set of standards: Yellow with Black Lettering – This option is used for any pipe that contains flammable and oxidizing liquids and gasses.

What is the commonly used pipe color code as per is 2379?

Commonly used Pipe Color Code As per Is 2379 Location of the color band and Labels Coloring and identification labels on the pipe should apply in such a way that is clearly visible from all the approach especially when pipes are overhead. ASME B13.1 and IS 2379 provides guidance on the positions of the labeling.

What color Pipe marking is used for acids?

Orange with Black Lettering – Orange labels with black lettering are for toxic or corrosive fluids. Most acids will need to use this type of pipe marking. Brown with White Lettering – This option is for all combustible fluids.

Yellow – Flammable or oxidizing gasses or fluids. Red – Fluids used to put out fires. Orange – Toxic or corrosive gasses or fluids. Green – Any type of water.

What are the Colour code standards?

Colour coding

Standard and/or project (15) Stage TC
ISO/R 508:1966 Identification colours for pipes conveying fluids in liquid or gaseous condition in land installations and on board ships 95.99 ISO/TC 8
ISO 1769:1975 Laboratory glassware — Pipettes — Colour coding 90.93 ISO/TC 48

What do different color pipes mean?

The National Colour Coding System for underground utilities are: Red – Electric power lines, conduit and cables. Orange – Telecommunication, alarm or signal lines. Yellow – Gas, oil, steam, petroleum, or other flammable material. Green – Sewage and drain lines.

Is standard for colour coding of pipelines?

This Indian standard covers the colour scheme for the identification of the contents of pipelines carrying fluids in domestic and public buildings and such industrial installations where a specific colour code does not exist.

What color are water pipes?


Water Lines: Raw water Olive Green
Waste Lines: Sludge Dark Brown
Sewer (sanitary or other) Dark Gray
Other Lines: Compressed Air Dark Green
Gas Red

How steel pipes are colour coded?

Blue with White Lettering – The blue labels with white lettering are used for pipes that transport compressed air. Red with White Lettering – This red label with white lettering is used for all fire quenching fluids. This could include water, but only if the pipe is used just for fire quenching.

What is the safety color code?

Safety Color Coding Labels and Tape

Yellow Caution
Orange Warning
Green Safety
Blue Information

Does OSHA require pipe labeling?

No, pipe labeling also falls within the OSHA General Duty clause (Section 5(a)(1) (General Duty Clause) of the OSH Act). What this means is that OSHA, although not directly stated, requires labeling on pipes in compliance with the ANSI A13. 1 standard.

How is PVC pipe marked?

If you purchased your PVC pipe from a hardware store, you can use the markings on the side of the pipe to tell you what size you have. It will normally indicate the size in decimal or fraction, close to where the manufacturer’s name is, such as ‘1.25’ (for 1-1/4″) or “3/4” (for 3/4″… obviously).

What is orange pipe?

Orangeburg pipe (also known as “fiber conduit”, “bituminous fiber pipe” or “Bermico”) is bituminized fiber pipe made from layers of ground wood pulp fibers compressed with and bound by a water resistant adhesive then impregnated with liquefied coal tar pitch.

What color is PVC pipe?

PVC pipe and fittings usually comes in white or dark gray. Always check the manufacturer printing on the pipe to be sure. Because of the differences in chemical makeup, sometimes PVC or CPVC also require different primers and solvents for connecting pipe and fitting joints.

Related Posts