What is a Class 3 receiver hitch?
Class 3: If you drive a crossover, van, SUV or truck, you likely have a Class 3 hitch. Class 3 hitches have 2-inch receiver sizes, and have a GTW capacity of up to 8,000 lbs. and a TW capacity up to 800 lbs. They also have a WD capacity of up to 12,000 lbs. and WDTW capacity of up to 1,200 lbs.
Table of Contents
What is the difference between Class II and Class III trailer hitch?
A Class II trailer hitch will have a 1-1/4 inch receiver and depending on the hitch can have a capacity up to 3,500 pounds and tongue weight capacity up to 525 pounds. Class III trailer hitches have a 2 inch receiver and can have capacities up to 8,000 pounds and tongue weight capacities up to 800 pounds.
How much can a Class 3 trailer hitch tow?
Class 3 hitches have a towing capacity between 3,500 to 8,000 lbs and a tongue weight capacity between 350 and 800 lbs. The square receiver openings of these class 3 receiver hitches are usually around 2 inches.
What is the difference between a Class 3 and Class 4 hitch?
The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For more info on the hitch classifications check out the link I attached.
How much tongue weight can a class 3 hitch take?
Hitch Classes
| Hitch Class | Tongue Weight Capacity* | Towing Capacity* |
|---|---|---|
| Class I | 100 – 150 lbs | 1,000 – 1,500 lbs |
| Class II | 200-350 lbs | 2,000 – 3,500 lbs |
| Class III | 350-500 lbs | 7,500 lbs |
| Class IV | 500+ lbs | 10,000 lbs |
What is the difference between a Class III and IV hitch?
Class III Hitch: A Class 3 trailer hitch can handle a GTW of up to 5,000 lbs. and a maximum tongue weight of 500 lbs. The standard type of this hitch is considered for general towing. Class IV Hitch: A Class 4 trailer hitch can handle a GTW of up to 10,000 lbs.
What’s the difference between a Class 3 and a Class Four trailer hitch?
What’s the difference between a class three and a class for receiver hitch?
Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to 3,500 lbs in GTW and up to 525 lbs in TW. Class III, on the other hand, have a 2 inch receiver and have up to 8,000 lbs GTW and 800 lbs TW. I will attach a help article that goes in to more detail for you.
What is a curt Class 3 trailer hitch?
Whatever your destination and whatever trailer you’re towing, Bring It® with a CURT trailer hitch! CURT class 3 trailer hitches are designed, built and tested to accommodate a wide variety of towing applications. They are used on everything from full-size cars, vans and crossovers to light-duty pickup trucks and SUVs.
What are the dimensions of a curt receiver hitch?
It also features a 2″ receiver tube opening to accept ball mount or other hitch accessory with a 2″ x 2″ shank. From class 1 to class 5, all CURT custom-fit receiver hitches are made in the USA to ensure quality from design to finish (may include imported hardware).
Will a curt Class 3 hitch fit a Honda Pilot?
Each CURT class 3 hitch is engineered to fit on a specific vehicle. This provides the best possible fit and easiest installation. This particular custom class 3 hitch fits specific years of the Honda Pilot and Acura MDX (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup tool).
Why choose a curt custom hitch?
Whatever your passion — whether it’s hunting, fishing, camping, offroading or hard work — you can expect reliability for the road ahead. All CURT custom hitches are covered by a limited lifetime warranty to give you confidence in each adventure, season after season.
