How do I add a device to InControl2?

Adding Devices To add new devices, click Organization Settings > Add Devices. You can also add a device from the . Click Group, then choose the desired group from the drop-down menu.

Table of Contents

What is Peplink in control?

InControl2. InControl 2 is the free cloud management, monitoring and reporting service designed specifically for Peplink devices. Any router, access point and device connector can be registered on this platform for unprecedented visibility and control.

What is pepwave InControl?

InControl 2 is our cloud based device management, monitoring, and reporting tool designed specifically for Peplink and Pepwave devices. Any of our devices can now be registered for InControl 2. With InControl 2, you get advanced administration tools, unprecedented device visibility, and comprehensive reporting.

How do I log into Pepwave?

Connect the Pepwave to your PC with an Ethernet cable and open a browser and connect to 192.168. 50.1 using admin as username and password. When logged in you get the following screen which shows the current state of WAN, LAN and WiFi.

What is SpeedFusion bonding?

SpeedFusion Bandwidth Bonding. Bandwidth bonding combines data at the packet level, enabling you to combine the speed of up to 13 connections. This is useful for situations where bandwidth is scarce, such as at a remote site or in a moving vehicle.

What is pepwave SpeedFusion?

What is SpeedFusion? SpeedFusion is Peplinks patented technology that powers enterprise grade VPNs. By tapping into the bandwidth of up to 13 low-cost cable, DSL, cellular, and other links, SpeedFusion turns your multiple connections into a single bonded connection.

How do I reset my pepwave admin password?

How to reset admin password on Balance 20/30/210/310. For Peplink Balance 20/30/210/310 Starting From Firmware 6.1. 0 you can press and hold the reset button for 5-10 secs: LED will start blinking to indicate the admin password has been reset to ‘admin’ and the port changed to HTTP (port 80).

How do I log into pepwave?

What is pepwave default password?

Pepwave Router Login Guide The default username for your Pepwave router is root. The default password is admin. Enter the username & password, hit “Enter” and now you should see the control panel of your router.