What does an A with a circle around it and an exclamation mark mean Jeep?
Tire Pressure Monitoring System Light – The tire pressure monitoring system will let you know if one of your tires has low pressure by lighting up a tire with an exclamation point.
What does the malfunction indicator light mean on a jeep?
Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and driveability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required.
What does lightning bolt warning light mean?
This is the Electronic Throttle Control (ETC) Indicator symbol. This light, a lightning bolt between reversed brackets or parenthesis, will illuminate if there is a problem in the electronic throttle control system. As an electronic system, it can sometimes be reset with a restart.
What does an A with a circle around it and an mean?
Ⓐ; The symbol of anarchism; an A inside a circle (and often extending slightly beyond it). The symbol is derived from the slogan “Anarchy is Order” by French anarchist Pierre-Joseph Proudhon.
What does the red lightning bolt mean on my Jeep Liberty?
Stuck Throttle Body A dirty throttle body can sometimes get stuck or damaged and when that is the case, the system might report a ETC fault by illuminating the red lightning bolt symbol on your Jeep dashboard. A visual and mechanical inspection will help you determine if the throttle body is working the way it should.
Why does my jeep have an A on the dash?
It means you have a problem with the auto start stop system.
What do the warning indicator lights mean on a Jeep Liberty?
The oil pressure warning light looks like an oil can. It lights up when you turn on your Jeep Liberty’s engine and then turns off. If the oil pressure warning light turns on while you are driving, the oil pressure sending unit is telling the computer you have low oil pressure.
Where is hazard light switch located on Jeep Liberty?
The Hazard Warning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency.
What causes a Jeep Liberty flashing engine light?
Thermostat : Engine thermostats that are stuck or not opening all the way are a fairly common problem on Jeep vehicles.
How to replace headlights in Jeep Liberty?