What is Group lockout tagout?

Group Lockout/Tagout is a method to provide employees a high-level of safety when multiple authorized employees need to work together to perform Maintenance or service on a piece of equipment.

What is one of the ways to conduct a group lockout tagout?

Group lockout/tagout steps could include: Place the team key inside of the lock-box. A lock-box or other device is used to hold the single key that is attached to the equipment to be locked out. Each team member uses their lock and tag on the lock-box.

How many locks are used in a group lockout process?

If more than 6 locks are required for the lockout, then the last hole is left empty so that another multi-lock hasp can be added, thereby allowing more locks to be added. Personal lock, a personal lock is one that is assigned to a particular worker involved in the operation.

What is group lockout procedure?

Under the standard’s group lockout/tagout requirements, a single authorized employee must assume the overall responsibility for the control of hazardous energy for all members of the group while the servicing or maintenance work is in progress.

What are the steps for group lockout?

Checklist: Group Lockout/Tagout Procedure

1. Prepare for shutdown (review the procedure and identify the machine’s energy sources)
2. Shutdown.
3. Notify affected employees.
4. Isolate equipment.
5. Apply LOTO devices.
6. Release stored energy.
7. Verify that the machine is isolated.

What are group lock boxes used for?

Group Lockout Boxes are storage devices that can be used to capture keys for the effective lockout of large equipment. Each lockout point on the equipment is secured with a single padlock.

What is the primary authorized employee responsible for during a group lockout?

Group Lockout/Tagout Procedure: A primary authorized employee shall be designated to exercise primary responsibility for implementation and coordination of the lockout/tagout of hazardous energy sources and for the equipment to be serviced. 2.

What is the function of group lock out device?

A group lockout is defined as a lockout that occurs when more than one employee will be performing maintenance on a single piece of equipment simultaneously. Similar to a personal lockout, there should be one authorized employee that is in charge of the entire group lockout.

What is the correct order of steps to apply a lockout/tagout control?

Let’s look at each of these steps of LOTO safety more closely in the sections below.

1. Lockout/Tagout Step 1: Preparation.
2. Lockout/Tagout Step 2: Shut Down.
3. Lockout/Tagout Step 3: Isolation.
4. Lockout/Tagout Step 4: Lockout/Tagout.
5. Lockout/Tagout Step 5: Stored Energy Check.
6. Lockout/Tagout Step 6: Isolation Verification.

What are the 7 steps of lockout tagout?

LOTO Safety: 7 Steps of lockout tagout

• Prepare for shutdown.
• Notify all affected employees of the activities and equipment involved.
• Shut down the equipment.
• Isolate the equipment from the hazardous energy source.
• Dissipate residual energy.
• Apply applicable lockout or tagout devices.

What is Lock conversation?

When you lock a conversation, you block all replies to posts and other activity on it.

What are the seven stages of safe lockout?