Why does my washing machine keep saying error?

Common appliance codes could be related to a problem with the door, a water heating sensor, a software or circuit board fault, a motor or pump fault plus much more. Simple things that could have an error code could be the door being left ajar on the machine or the detergent drawer not in situ properly.

What does UE mean on a Daewoo washing machine?

Daewoo Washing Machine Error Fault Code = UE Fault Detected: Washer Load Imbalance. Washer Has Detected: Unbalanced load and the washing machine has failed to spin. Check / Repair / Fix = Resort clothing load and start wash again.

How do I fix E8 error on washing machine?

The E08 error code that your machine is displaying relates to problems with the motor, usually with the motor speed sensor….To investigate further:

1. Switch off and unplug your machine.
2. Check the motor speed sensor.
3. Check the wiring and connections to the speed sensor.
4. If the motor is not turning check the motor itself.

What does E8 mean on a Daewoo washing machine?

Washer Motor Error
E8 = Washer Motor Error. E9 = Pressure Sensor Error. H2 = Wash Temperature Sensor. H4 = Overheating Washer Heating Element. H6 = Washer Heating Element Failed.

How do I fix UE error?

The UE Error Code means you have an unbalanced load. That probably means that there’s too much laundry on one side of the drum. There are 3 easy fixes….There are 3 easy fixes.

1. Check the washer legs. All four should rest evenly on the ground with nothing underneath them.
2. Redistribute the wash.
3. Try turning it off and on.

How do I fix the UE on my washing machine?

Follow the solutions below to fix the issue and clear the UE error code.

1. Make Sure the Load is Balanced.
2. Run a Rinse and Spin Cycle.
3. Check That the Washer Is Level.
4. Adjust the Legs to Level the Washer.
5. Check the Leveling Legs.
6. Check the Rotor Mounting Nut.
7. Check the Suspension Rods or Shock Absorbers.
8. Check the Hall Sensor.

What does E08 mean on candy washing machine?

motor speed sensor
An E08 error code indicates a problem with the motor speed sensor. This can result in the motor spinning up at very high speed for a few seconds before slowing down and then stopping. It may also mean that the motor is not spinning.

What is E8 error in Haier washing machine?

Question: Error Code-control panel display “E8” Answer: Reason:Water protection level error. Solution:Auto release. Otherwise if the error is still exist, please unplug the machine and turn the water tap off, then call for service.

What does E8 mean on a Haier washing machine?

Water protection level error
Question: Error Code-control panel display “E8” Reason:Water protection level error. Solution:Auto release. Otherwise if the error is still exist, please unplug the machine and turn the water tap off, then call for service.

Why does my washing machine keep beeping during cycle?

Washer sounds and beeps Your machine is checking that the water has drained before spinning. Your washer will beep if you have used ‘No Spin’ and at the end of the cycle. If your machine is beeping continuously or giving a musical series of beeps, refer to the ‘Before you call for service’ section.

What do the error codes on my Daewoo washing machine mean?

Whatever problem the washing machine is experiencing (problems with the water supply, incorrect drain hose installation, door not locking etc.), it typically displays an error code that shows you the type of problem. To decipher it, refer to the list of Daewoo error codes below.

Is Daewoo still in business?

Although the company went bankrupt in 1999, some of its divisions survive today as independent companies. Want to know whether your Daewoo washer issue is serious enough to hire a service engineer?

How many divisions does Daewoo have?

It consisted of about 20 divisions. Although the company went bankrupt in 1999, some of its divisions survive today as independent companies. Want to know whether your Daewoo washer issue is serious enough to hire a service engineer?